carburettor-dell-orto-shbc-1816p_19622820
Dellorto Carburetor SHBC 18.16P for Piaggio Ape 50 RST / ​MIX / ​Cross
$172.50 incl GST Add to cart

Dellorto Carburetor SHBC 18.16P for Piaggio Ape 50 RST / ​MIX / ​Cross

$172.50 incl GST

Earn 15 points upon purchasing this product.

Dellorto Carburetor SHBC 18.16P for Piaggio Ape 50 RST/​MIX/​Cross

  • Connection engine: 23,1mm
  • Connection filter: Stehbolzen LA 51,5mm
  • Disc valve
  • Main jet 56
  • Idle mixture jet 42
  • With oil pump, incl. throttle cable

OEM numbers (for comparisons): A00958 (Malossi) 00958 (Dellorto)

In stock


dellorto_brand_image

Free New Zealand wide shipping on all orders over $175

  • 30 day easy return
  • Order yours before 2.00pm for same day dispatch
Guaranteed Safe Checkout

Paypal | Credit Card | Afterpay | Direct Credit

Dellorto Carburetor SHBC 18.16P for Piaggio Ape 50 RST/​MIX/​Cross

  • Connection engine: 23,1mm
  • Connection filter: Stehbolzen LA 51,5mm
  • Disc valve
  • Main jet 56
  • Idle mixture jet 42
  • With oil pump, incl. throttle cable

OEM numbers (for comparisons): A00958 (Malossi) 00958 (Dellorto)

The Dellorto SHB is THE small frame carburetor. It is fitted as standard on almost all of the ‘little ones’. It is available with a 16-20mm outlet. The SHB is designed very logically and just like the SI, it does not have a pin. It is relatively easy to tune with the help of the main and idle jets. All of our SHB carburetors are originals and direct from Dellorto.

The SHB models for the Vespa 50-125/PV/ET3 are almost identical. They are perfect for straightforward Plug&Play tuning. An SHBC 19.19 gives a small frame with a 75cc cylinder a genuine boost and also supplies 130cc engines with a sufficient charge of fuel.

On the SHB for the PK, the steel mesh of the air filter was replaced with a washable, round filter element. With the exception of the SHBC 19.19E for the PK80, it also has an O-ring in the intake duct for optimum sealing. On the SHB, the throttle cable meets the PK from the other side on the carburetor cover than with the V50/PV/ET3.

Conclusion: The classic small frame carburetor for original engines and decent 130cc tuning setups.

TIP: When changing the size of the carburetor, also order matching intake manifolds (e.g. part no 158000 for SHB 19.19 V50/PV). Ensure you always have enough 5mm main jets at home.

Additional information

Weight .700 kg

Product Fittment Guide

Model / manufacturer cc Type Engine Year of construction Additional
PIAGGIO APE 50 FL / FL2 50 TL6T 2T AC ’89-
PIAGGIO APE 50 FL3 50 TL5T 2T AC ’96-
PIAGGIO APE 50 Mix 50 ZAPC80 2T AC ’98-’18

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.