PIAGGIO Cruciform for Vespa PX80-200 E Lusso 2°/’98/MY/’11/T5/Cosa
- Also for LML Star 125-200 2T/4T/Deluxe 2T/4S/Speedy/Stella
- PX Lusso
- 5° type
OEM numbers (for comparisons): 2232255 (PIAGGIO) SF513-1552 (LML)
The gear selector cruciform has one of the toughest jobs in the whole gear box. The gear selector cruciform is put in position within the desired gear cog on the output shaft every time you change gear and ensures that the power of the motor can be effectively transmitted through the desired gear, to the output shaft, and finally the rear wheel.
The intervals at which the cruciform should be replaced are determined by the mileage of the motor. The life of an average cruciform is usually over after 10-12000 km or 6-7500 miles. Broken or incorrect selector boxes or rods, wrongly assembled output shaft assemblies, or badly adjusted gear cables all shorten the life of an average cruciform quite drastically. This leads to the gears not staying in position and in a worst case scenario create much more extensive damage within your motor. For this reason the cruciform should be replaced during every major service of your motor.
ScooterCafé-TIP: Always check that you assemble the gear cogs correctly arranged and in the right order . Do not forget to measure the end float to be sure of the correct tolerances for your output shaft assembly. Check the cruciform and selector box for wear and always use fresh gear box oil!
Reviews
There are no reviews yet.